An attractive traditional wired push in a Black finish. Suitable for wired doorbell systems up to 24v or battery powered. This push is 60mm diameter with a distance between the two holes of 45mm.

A flush fitting solid brass bell push - this means that the push fits flush to the wall or doorframe with the movement behind the push. There is a need for a small hole behind for the movement and bell wire. The centre push will complete a circuit in a wired doorbell system (these circuits operate between 8v -24v) and the push is certified for these low voltages, independent of whether the door bell system is powered by a bell transformer or batteries.

These pushes can also be linked into Wired to Wirefree Extenders enabling them to be used with wireless doorbells.

• Bell Push Size : 60mm Diam. (2.5").
• Brass UPVD Coated for durability
• For use with battery or transformer powered doorbells
• Hole behind should be 18mm diam. and 8mm deep

• Screw holes are 45mm apart, and can be arranged horizontally.

Wired Bell Push Black 60mm - PRI-2207P1Bk