Zamel Wired Loud Doorbell Wall Mounted Mechanical Compact 8V Bell White

Zamel Wired Loud Doorbell. A wired electro-mechanical wall mounted doorbell for use with an external transformer giving a strong traditional buzzing sound.

Specifications

• Colour - White
• Steel bowl, varnished or chromium-plated, enclosed in a plastic casing
• Bell Dimensions - 130 x 235 x 46 mm
• Wall Mounted Bell
• External 8v, 1 amp transformer operation
• Warranty 2 years
• Sound Level, app. 80dB

Main features:

• Electromechanical bell is designed for using in rooms with 8 V AC bell supply systems.
• Loudness: 80 dB,
• The steel bowl bell, lacquered (ø76 mm).
• Zamel Wired Loud Doorbell
• Wall Mounted Mechanical

Mountain Instruction:

1. A qualified electrician should mount the bell.
2. The wire type should be appropriate for local circumstances.
3. The bell may by powered by 8 V AC voltage only.
4. It is necessary to prevent a phase wire against shortcuts and overloads by means of an overcurrent switch or a safety fuse with an appropriate rated current and electrical characteristic.
5. In necessary to disconnect 8 V AC mains before you connect the bell. Check if there is no voltage between power leads by means of an appropriate gauge.
6. Remove the bell cover by means of a screwdriver. In is necessary to release the cover catch.
7. Drill the mounting holes in the wall and insert studs into the holes. The hole spacing should be the same as in the bell base.
8. Lead the bell wires through the hole in the bell base and screw the base on to the wall by means of the appropriate screws. Mount the bell base carefully in particular, check if it is mounted vertically in a proper way.
9. Strip the bell electrical system wire ends insulation (approximately 10 mm in length) and connect the wires to appropriate terminals.
10. Place the bell cover again and switch 8 V AC mains on.
11. Press the bell push button to check if the bell operates properly.
12. If necessary, adjust the bell loudness by means of turning the bell bowl.

NOTE! Check if there is no voltage between power leads before you remove the chime cover